#service iptables restart 시 iptables 모듈을 제거하는 중: 멘트나오면서 정상 진행 안됨
---------------------------------------
[root@www sysconfig]# nslookup
> www.whoishg.com
Server:         118.128.134.115
Address:        118.128.134.115#53

Name:   www.whoishg.com
Address: 118.128.134.103
> whoishg.com
Server:         118.128.134.115
Address:        118.128.134.115#53

*** Can't find whoishg.com: No answer
> 118.128.134.116
Server:         118.128.134.115
Address:        118.128.134.115#53

** server can't find 116.134.128.118.in-addr.arpa.: NXDOMAIN

  ==> 역방향 조회 가능하도록 reverse 설정 안되어서 발생함
> 118.128.134.103
Server:         118.128.134.115
Address:        118.128.134.115#53

** server can't find 103.134.128.118.in-addr.arpa.: NXDOMAIN

==> 역방향 조회 가능하도록 reverse 설정 안되어서 발생함

> 118.128.134.115
Server:         118.128.134.115
Address:        118.128.134.115#53

** server can't find 115.134.128.118.in-addr.arpa.: NXDOMAIN

==> 역방향 조회 가능하도록 reverse 설정 안되어서 발생함

 

 problem with starting named/Bind services in CentOS release 5.X

On starting Bind sometimes you get the following error :

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[root@sever]# /etc/init.d/named start

Locating /var/named/chroot//etc/named.conf failed: [FAILED]

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

It occurs cause in CENTOS 5.x OS, some of the Bind/named files are not located on the desired location.

 

Resolution :

~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[root@sever]# locate named.conf

/etc/dbus-1/system.d/named.conf

/usr/share/doc/bind-9.3.6/sample/etc/named.conf

/usr/share/logwatch/default.conf/services/named.conf

/usr/share/man/man5/named.conf.5.gz

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

You will get a list of paths, similar to the above list. Copy the "named.conf" at /usr/share/doc/bind-9.x.x path to the desired location.

 

at the my time /chroot/etc directories was not available on sever So, I created it .

 

[root@sever]# mkdir -p /var/named/chroot/etc

Then, copied the named.conf .

 

[root@sever]#cp /usr/share/doc/bind-9.3.6/sample/etc/named.conf /var/named/chroot/etc

 

Note : In case the Bind is not chrooted, copy the file in /etc

 

Now, try to start the Named/Bind Service :

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[root@sever]# /etc/init.d/named start

Error in named configuration:

/etc/named.conf:57: open: /etc/named.root.hints: file not found [FAILED]

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Locate the "named.root.hints" file on the system:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[root@sever]# locate named.root.hints

/usr/share/doc/bind-9.3.6/sample/etc/named.root.hints

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

And Copied it in desire Location:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[root@sever]# cp /usr/share/doc/bind-9.3.6/sample/etc/named.root.hints /var/named/chroot/etc

 

if Bind is not chrooted:

 

[root@sever]# cp /usr/share/doc/bind-9.3.6/sample/etc/named.root.hints /etc

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Now try to start Named/Bind Service :

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[root@sever]# /etc/init.d/named start

Starting named:

Error in named configuration:

/etc/named.conf:63: open: /etc/named.rfc1912.zones: file not found [FAILED]

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

locate the rfc1912.zones :

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[root@sever]# locate named.rfc1912

/usr/share/doc/bind-9.3.6/sample/etc/named.rfc1912.zones

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

And copied it in :

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[root@sever]#

 

if Bind is not chrooted:

 

[root@sever]# cp /usr/share/doc/bind-9.3.6/sample/etc/named.rfc1912.zones /etc

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Start the Named/Bind service :

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[root@sever]# /etc/init.d/named start

Starting named:

Error in named configuration:

zone localdomain/IN: loading master file localdomain.zone: file not found

localhost_resolver/localdomain/IN: file not found

zone localhost/IN: loading master file localhost.zone: file not found

localhost_resolver/localhost/IN: file not found

zone 0.0.127.in-addr.arpa/IN: loading master file named.local: file not found

localhost_resolver/0.0.127.in-addr.arpa/IN: file not found

zone 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0. 0.0.0.0.0.0.ip6.arpa/IN: loading master file named.ip6.local: file not found

localhost_resolver/0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0. 0.0.0.0.0.0.ip6.arpa/IN: file not found

zone 255.in-addr.arpa/IN: loading master file named.broadcast: file not found

localhost_resolver/255.in-addr.arpa/IN: file not found

zone 0.in-addr.arpa/IN: loading master file named.zero: file not found

localhost_resolver/0.in-addr.arpa/IN: file not found

zone my.internal.zone/IN: loading master file my.internal.zone.db: file not found

internal/my.internal.zone/IN: file not found

zone my.ddns.internal.zone/IN: loading master file slaves/my.ddns.internal.zone.db: file not found

internal/my.ddns.internal.zone/IN: file not found

zone my.external.zone/IN: loading master file my.external.zone.db: file not found

external/my.external.zone/IN: file not found

[FAILED]

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Now, if you will get the above error, we need to remove some part of data from "named.conf" file. Remove this whole section in the copied "named.conf" file:

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

view "localhost_resolver"

{

/* This view sets up named to be a localhost resolver (caching only nameserver).

* If all you want is a caching-only nameserver, then you need only define this view:

*/

match-clients { localhost; };

match-destinations { localhost; };

recursion yes;

# all views must contain the root hints zone:

include "/etc/named.root.hints";

 

/* these are zones that contain definitions for all the localhost

* names and addresses, as recommended in RFC1912 - these names should

* ONLY be served to localhost clients:

*/

include "/etc/named.rfc1912.zones";

};

view "internal"

{

/* This view will contain zones you want to serve only to "internal" clients

that connect via your directly attached LAN interfaces - "localnets" .

*/

match-clients { localnets; };

match-destinations { localnets; };

recursion yes;

// all views must contain the root hints zone:

include "/etc/named.root.hints";

 

// include "named.rfc1912.zones";

// you should not serve your rfc1912 names to non-localhost clients.

 

// These are your "authoritative" internal zones, and would probably

// also be included in the "localhost_resolver" view above :

 

zone "my.internal.zone" {

type master;

file "my.internal.zone.db";

};

zone "my.slave.internal.zone" {

type slave;

file "slaves/my.slave.internal.zone.db";

masters { /* put master nameserver IPs here */ 127.0.0.1; } ;

// put slave zones in the slaves/ directory so named can update them

};

zone "my.ddns.internal.zone" {

type master;

allow-update { key ddns_key; };

file "slaves/my.ddns.internal.zone.db";

// put dynamically updateable zones in the slaves/ directory so named can update them

};

};

key ddns_key

{

algorithm hmac-md5;

secret "use /usr/sbin/dns-keygen to generate TSIG keys";

};

view "external"

{

/* This view will contain zones you want to serve only to "external" clients

* that have addresses that are not on your directly attached LAN interface subnets:

*/

match-clients { !localnets; !localhost; };

match-destinations { !localnets; !localhost; };

 

recursion no;

// you'd probably want to deny recursion to external clients, so you don't

// end up providing free DNS service to all takers

 

// all views must contain the root hints zone:

include "/etc/named.root.hints";

 

// These are your "authoritative" external zones, and would probably

// contain entries for just your web and mail servers:

 

zone "my.external.zone" {

type master;

file "my.external.zone.db";

};

};

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Now Start the Named/Bind Service :

 

[root@sever]## /etc/init.d/named start

Starting named: [ OK ]

 

 

 

'DNS 서버구축 > 이슈발생' 카테고리의 다른 글

이슈발생_0329_역방향 조회  (0) 2013.04.04

+ Recent posts